|
|  | | ERT | user manual | | Max Cap-Division
1000kg--0.5kg
2000kg--1kg
3000kg--1kg
5000kg--2kg
10000kg--5kg
20000kg--10kg
30000kg--10kg
50000kg--20kg
100000kg--50kg
200000kg--100kg
| *. CE Approved
*. 25mm LCD display with back-light
*. Local key: ON/OFF; ZERO; PEAK and UNIT
*. Auto shut off
*. Kg/t/lb/N/KN units
*. Low power warning
*. High duty alloy steel shackle and hook
*. Overload warning – programmable set
*. AA battery
*. Standard: Infrared remote control calibration
*. 1-5t: Aluminum; above 5t: alloy steel
*. Standard function : Zero,Tare,Clear,Peak,Accumulate,Hold,Unit,Voltage etc.
Option: wireless indicator – handhold, frequency 2.4G
*. Wireless indicator – 99 channel setting
*. Wireless transmission distance: no less than 100 meters when nobstructed
*. Bi-directional transmission control by indicator
*. Option: RS232 interface - optional
Networks options:
A. single network between one dynamometer and one indicator
B. single network between two dynamometers and one indicator,
Indicator control load of each dynamometer and plus total value
C. single network between multiple dynamometers (up to 5)and one indicator
Indicator control load of each dynamometer and plus total value |
| | |  | | LK | user manual | | Max Cap-Division-Pan Size
5KN--0.1KN
10KN--0.2KN
20KN--0.5KN
30KN--0.5KN
50KN--1KN
100KN--2KN
200KN--5KN
300KN--5KN
500KN--10KN
| *. CE approved
*. Unit: KN
*. Accuracy: 2%; 1% is available extra cost usd30.00
*. Load force slowly and gradually
*. Dont overload
*. Before using, please adjust as belows:
1. Adjust the black needle to zero
2. Adjust the red needle to be same with black needle
|
| | |  | | MS-A1 | user manual | | Max Cap-Division-Pan Size
50-500N --0.01N
1-5KN --1N
10-20KN --0.01KN
30-50KN --0.01KN
75-100KN--0.1KN
150-200KN--0.1KN
| *. Indicator capacity: 1N-1000KN
*. Accuracy: 0.5%, division to 0.1%
*. Having 5 kinds of test modes, 3 kinds of display usages for selection
*. Units : N, Kg and lb
*. Function of reset gravity acceleration
*. Peak hold and auto clearance function
*. Set the tolerance limit (Max/Min);
*. Super memory function - deposit 888 test values.
*. RS-232 output;
a. match a free software for analysis ( without graph).
b. match a synchronous test software ( software is optional ), it can connect to PC to get synchronous graph, and also can reserve ,print, analysis, and so on.
|
| | |
|
